Displaying Switches & Wiring -Seat & Fenders parts for the Cub Cadet 1215 S/N 114,001 - 126,000

Find a full parts listing for all the parts in the Switches & Wiring -Seat & Fenders section of your equipment and add them straight to your cart from here.
Search by part description:
1

Cub Cadet 725-3039

Switch, Seat

Not available
2

Cub Cadet 725-3119

Switch, Transmission Shift Lever

Not available

Cub Cadet 925-3119

Alternative for 725-3119: SWITCHSAFETY

Your price: $8.73

0 of these in your cart

Qty:

Cub Cadet 710-3150

Screw, #4 X 1-1/2 Znp P/Hds Mach

Not available

Cub Cadet 712-3052

Nut, No. 4 Mach Screw

Your price: $1.90

0 of these in your cart

Qty:
3

Cub Cadet 725-3119

Switch, Shift Cover

Not available

Cub Cadet 710-3152

Screw, #4 X 3/4 Phc P/Hds Mach

Your price: $5.76

0 of these in your cart

Qty:
4

Cub Cadet 703-1165

Bracket, Switch Mounting

Not available
5

Cub Cadet 703-1164

Plate, Switch

Not available

Cub Cadet 710-0751 (replaces 710-0751)

Bolt, 1/4 X 5/8

Your price: $2.09

0 of these in your cart

Qty:

Cub Cadet 736-0463

Washer, .281 X .62 X .06

Not available

Cub Cadet 936-0463

Alternative for 736-0463: WASHERFL

Your price: $2.27

0 of these in your cart

Qty:
6

Cub Cadet 703-1163

Plate, Shift Cover Switch

Not available

Cub Cadet 710-3148

Screw, #8 X .43 Hex-Washer Hd

Not available
7

Cub Cadet 725-3121

Harness, Main Wiring

Not available
8

Cub Cadet 731-3061

Cover, Switch

Not available

2-Cycle Equipment

A basic spring service performed each year should include, at least, the following;
Sharpen or Replace and Adjust Chain (chainsaw) as needed.
Inspect air filter for dirt accumulation now, and before each usage and clean or replace. Replace air filter after 25 hours.
Inspect spark plug/s every 25 hours and replace if fouled.
Inspect entire unit including all wear items such as control cables, sprockets, handles, tubes and other parts and watch for worn, cracked, pinched or otherwise damaged parts, and replace if found.
Drain fuel-mix from fuel system and replace with fresh fuel-mix if it has been over three months since last usage without fuel stabilizer. If performing and end-of-season service, drain fuel tank or run engine until it runs out of fuel. (alternatively you may dose "fresh" fuel-mix with a fuel stabilizer)