Displaying Generator and Connections (Cub S/N 221292 & Below) parts for the Cub Cadet Farmall Cub Tractor (S/N 501 to 185,000)

Find a full parts listing for all the parts in the Generator and Connections (Cub S/N 221292 & Below) section of your equipment and add them straight to your cart from here.
Search by part description:
1

Cub Cadet IH-356936-R91

GENERATOR ASSY - 6 VOLT

(FOR TRACTORS EQUIPPED WITH GE...

Not available

Cub Cadet IH-1911485

CABLE

Not available

Cub Cadet IH-1877569

CABLE

Not available

Cub Cadet IH-1101423

GENERATOR

Not available

Cub Cadet IH-1116766

RELAY

Not available

Cub Cadet IH-132900

SCREW

Not available

Cub Cadet 736-0931 (replaces IH-120391)

WASHER

Your price: $3.96

0 of these in your cart

Qty:

Cub Cadet IH-138479

WASHER

Not available

Cub Cadet IH-103025

NUT 5/16-24 HEX.

Not available

Cub Cadet IH-102647

NUT 1/2-20 SLT HEX.

Not available

Cub Cadet IH-103374

PIN 3/32 X 1 COT.

Not available

Cub Cadet IH-181340

SCREW, 5/16-24 X 1-1/8 HEX-HD CAP

Not available

Cub Cadet 936-0160 (replaces IH-178373-R1)

WASHER, 17/32 X 1 X .056 ZND

Your price: $3.75

0 of these in your cart

Qty:

Cub Cadet IH-103320

WASHER, 5/16 MED LOCK

Not available
2

Cub Cadet IH-1116766

RELAY ASSY.

(GENERATOR IH-46412D; FOR TRAC...

Not available
3

Cub Cadet IH-557264-R1

WASHER, 11/32 X 3/4 X .105

Not available
4

Cub Cadet IH-351319-R1

BRACE, GENERATOR

Not available

Cub Cadet IH-179816

SCREW, 5/16-18 X 3/4 HEX-HD CAP

Not available

Cub Cadet IH-103340

WASHER, 11/32 X 11/16 X 16 GA

Not available
5

Cub Cadet IH-124545

KEY, 1/8 X 5/8 WOODRUFF NO. 5 ALY-STL

Not available
6

Cub Cadet IH-351320-R1

PULLEY, GENERATOR

(CUB TRACTORS W/SERIAL NOS 165...

Not available

Cub Cadet IH-358212-R1

PULLEY, GENERATOR

(CUB TRACTORS W/SERIAL NOS 164...

Not available
7

Cub Cadet IH-364907-R1

PULLEY, GENERATOR

(CUB TRACTORS W/SERIAL NO. 196...

Not available
8

Cub Cadet IH-1917746

NUT, ARMATURE SHAFT

(USED WITH GENERATOR, IH-11005...

Not available

Cub Cadet IH-1915172

NUT, ARMATURE SHAFT

(USED WITH GENERATOR, IH-11005...

Not available

Cub Cadet IH-804000

WASHER, ARMATURE SHAFT NUT LOCK

Not available
9

Cub Cadet IH-351321-R1

BELT, GENERATOR

(CUB TRACTORS W/SERIAL NO. 165...

Not available

Cub Cadet IH-107671-C1 (replaces IH-358213-R1)

BELT, GENERATOR

(CUB TRACTORS W/SERIAL NO. 165...

Your price: $20.07

0 of these in your cart

Qty:
10

Cub Cadet IH-351318-R1

BRACKET, GENERATOR

Not available

Cub Cadet IH-179840

SCREW, 3/8-16 X 1-1/8 HEX-HD CAP

Not available

Cub Cadet IH-103321

WASHER, 3/8 MED LOCK

Not available
11

Cub Cadet IH-121578-C2 (replaces IH-121578-C1)

REGULATOR ASSY VOLTAGE - 6 VOLT

(REPLACES IH-1119575)

Your price: $125.20

0 of these in your cart

Qty:

Cub Cadet IH-109084

NUT, 1/4-20 HEX.

Not available

Cub Cadet IH-179792

SCREW, 1/4 X 9/16 HEX-HD CAP

Not available

Cub Cadet IH-103319

WASHER, 1/4 MED LOCK

Not available
12

Cub Cadet IH-354247-R1

BRACKET, VOLTAGE REGULATOR MOUNTING

Not available
13

Cub Cadet IH-1100501

GENERATOR ASSY - 6 VOLT

(IH-354237-R91; HAS LONG 1-3/4...

Not available

Cub Cadet IH-1100531

GENERATOR ASSY - 6 VOLT

(IH-362657-R91; HAS SHORT 1-1/...

Not available

4-Cycle Equipment

A basic spring service performed each year should include, at least, the following;
Check the Oil and inspect for contaminants such as water (milky), fuel (too full, thin and smells of gas) or metal particles. Contact a service tech if any are found.
Change your oil now and every 25 hours thereafter.
Sharpen blades now and every 25 hours thereafter.
Inspect air filters for dirt accumulation now, and before each usage and clean or replace. Replace air filters after 25 hours.
Inspect spark plugs every 25 hours and replace if fouled.
Grease all bearings and mechanisms requiring grease.
Inspect entire unit including all wear items such as belts, tires, control cables, bearings and other parts and watch for worn, cracked, pinched or otherwise damaged parts, and replace if found.
Drain fuel from fuel system and replace with fresh fuel if it has been over three months since last usage without fuel stabilizer. If performing and end-of-season service, drain fuel tank or run engine until it runs out of fuel. (alternatively you may dose "fresh" fuel with a fuel stabilizer)