Displaying Front Power Take-Off -90 Degree Gear Box- parts for the Cub Cadet QA36, QA42 Snowthrower

Find a full parts listing for all the parts in the Front Power Take-Off -90 Degree Gear Box- section of your equipment and add them straight to your cart from here.
Search by part description:
1

Cub Cadet 490123-R1

PLATE ASSY., FRONT MOUNTING

USED W/BELT ADJUSTER BOLT

Not available

Cub Cadet 490127-R1

ON LOWER RH FRONT

Not available

Cub Cadet 18684-R1

BOLT, 3/8 x 1-1/4 C-Z SQ-NK CRG

Not available

Cub Cadet 120377

NUT, 3/8-16 CD OR ZN-PLTD HEX

Not available

Cub Cadet 446548

WASHER, 3/8 X 3/4 X .065 CD OR ZN-PLTD

Not available

Cub Cadet 120382

WASHER, 3/8 CD OR ZN-PLTD MED LOCK

Not available
1

Cub Cadet 544282-R1

PLATE ASSY., FRONT MOUNTING

USED W/ADJUSTER ON LH SIDE AND...

Not available
2

Cub Cadet 490129-R1

BRACKET ASSY., LIFT

Not available
3

Cub Cadet 490130-R1

SHAFT, PIVOT

Not available

Cub Cadet 187988

PIN, 3/16 X 1-1/4 CD OR ZN-PLTD COT.

Not available
4

Cub Cadet 485247-R91

PULLEY, GEAR BOX

REPLACES P/N 475613-R91

Not available

Cub Cadet 102581

SCREW, 5/16-18 X 3/8 HEX-SOC-HD CUP-PT SET

Not available
5

Cub Cadet 474098-R1

KEY, 3/16 X 1-1/4 SQ PARALLEL

Not available
6

Cub Cadet 487043-R1

BELT, V

Not available
7

Cub Cadet 462729-R1

SPACER, PLATE

Not available
7

Cub Cadet 490133-R1

BAR, SPACER

USE ONLY ON CUB CADET 70, 71, ...

Not available

Cub Cadet 20249-R1

SCREW, 1/2-13 X 1 C-Z SLT THRUSS-HD MACH

Not available

Cub Cadet 180175

SCREW, 1/2-13 X 1-1/4 C-Z HEX-HD CAP

Not available

Cub Cadet 120378

NUT 1/2-13 C-Z HEX

Not available

Cub Cadet 120384

WASHER, 1/2 C-Z MED LOCK

Not available
8

Cub Cadet 490125-R1

SPACER

Not available
9

Cub Cadet 490126-R1

PLATE, GEAR BOX MOUNTING

Not available
10

Cub Cadet 489374-R1

BOLT, SHOULDER

Not available

Cub Cadet 120396

WASHER, 17/32 X 1-1/16 X .095 C-Z

Not available
11

Cub Cadet 490127-R1

BOLT ASSY., BELT ADJ.

Not available
12

Cub Cadet 490128-R1

PLATE LOCK

Not available

Cub Cadet 137185

PIN 1/8 X 1 C-Z COT.

Not available
13

Cub Cadet 475596-R1

BOX, GEAR

Not available
14

Cub Cadet 475606-R1

SHAFT INPUT

Not available

Cub Cadet 16888-R1

BOLT, 5/16 X 1-1/4 C-Z SQ-NK CRG

Not available

Cub Cadet 120376

NUT, 5/16-18 CD OR ZN-PLTD HEX

Not available

Cub Cadet 120214

WASHER, 5/16 CD OR ZN-PLTD MED LOCK

Not available
15

Cub Cadet 269181-R1

RING, RETAINING SNAP

Not available
16

Cub Cadet 475627-R91

BEARING, INNER

Not available
16

Cub Cadet 475628-R91

BEARING, OUTER

Not available
17

Cub Cadet 475642-R1

KEY, 3/16 X 11/16 SQ PARALLEL

Not available
18

Cub Cadet 475604-R1

GEAR, BEVEL PINION

Not available
19

Cub Cadet 475602-R1

SHAFT, OUTPUT

Not available
20

Cub Cadet 475600-R1

GEAR, BEVEL

Not available
21

Cub Cadet 475597-R1

COVER, GEAR BOX

Not available

Cub Cadet 180020

SCREW, 1/4-20 X 3/4 CD OR ZN-PLTD HEX-HD CAP

Not available

Cub Cadet 120380

WASHER, 1/4 CD OR ZN-PLTD MED LOCK

Not available

Cub Cadet 444687

PLUG 1/8-27 AUTOMOTIVE HEX-SOC-HD PIPE

Not available
22

Cub Cadet 475598-R1

GASKET, GEAR BOX COVER

Not available
23

Cub Cadet 527742-R1

PLATE, PIVOT

Not available

Cub Cadet 180122

BOLT, 3/8 X 1 C-Z SQ-NK CRG

Not available

Cub Cadet 442813

NUT, 3/8-16 HEX LOCK

Not available

Cub Cadet 120394

WASHER, 13/32 X 13/16 X .065 C-Z

Not available
24

Cub Cadet 527743-R1

SPACER

Not available
25

Cub Cadet 527744-R1

NUT, SWIVEL

Not available
26

Cub Cadet 527745-R1

BOLT, EYE

Not available

Cub Cadet 120398

WASHER, 17/32 X 1-1/16 X .095 C-Z

Not available

2-Cycle Equipment

A basic spring service performed each year should include, at least, the following;
Sharpen or Replace and Adjust Chain (chainsaw) as needed.
Inspect air filter for dirt accumulation now, and before each usage and clean or replace. Replace air filter after 25 hours.
Inspect spark plug/s every 25 hours and replace if fouled.
Inspect entire unit including all wear items such as control cables, sprockets, handles, tubes and other parts and watch for worn, cracked, pinched or otherwise damaged parts, and replace if found.
Drain fuel-mix from fuel system and replace with fresh fuel-mix if it has been over three months since last usage without fuel stabilizer. If performing and end-of-season service, drain fuel tank or run engine until it runs out of fuel. (alternatively you may dose "fresh" fuel-mix with a fuel stabilizer)