Displaying Rotor parts for the Cub Cadet QA36, QA42 Snowthrower

Find a full parts listing for all the parts in the Rotor section of your equipment and add them straight to your cart from here.
Search by part description:
1

Cub Cadet 397030-R1

SHAFT, TAIL

Not available
2

Cub Cadet 475538-R91

BEARING W/SET SCREWS

Not available

Cub Cadet 16897-R1

BOLT, 5/16-18 X 3/4 CD OR ZN-PLTD SHORT-SQ-NK CRG

Not available

Cub Cadet 120376

NUT, 5/16-18 CD OR ZN-PLTD HEX

Not available

Cub Cadet 120214

WASHER, 5/16 CD OR ZN-PLTD MED LOCK

Not available
3

Cub Cadet 59746-C1

ROTOR ASSY.

WILL WORK FOR P/N 397028-R1; U...

Not available
3

Cub Cadet 59747-C1

ROTOR ASSY.

WILL WORK FOR P/N 397029-R1

Not available

Cub Cadet 443333

NUT, 5/16-18 CD-PLTD HEX LOCK

Not available

Cub Cadet 189298

SCREW, 5/16-18 X 4 C-Z HEX-HD CAP

Not available
4

Cub Cadet 397033-R1

PIN MOUNTING

Not available

Cub Cadet 177923

PIN, 1/8 X 3/4 C-Z COTTER

Not available
5

Cub Cadet 397032-R1

BRACKET, SPROCKET MOUNTING

Not available

Cub Cadet 120378

NUT, 1/2 TYPE 5

Not available

Cub Cadet 474088-R1

SCREW, 1/2-13 X 3 HEX-HD

Not available
6

Cub Cadet 397034-R1

SHAFT, TRANSFER

Not available
7

Cub Cadet 76897-C1

SPROCKET, SMALL-14 T

REPLACES 397035-R1 BY ALSO ORD...

Not available

Cub Cadet 19689-R1

PIN, 1/4 X 1-1/4 HV COILED SPRING

Not available
8

Cub Cadet

CHAIN, ROLLER-FOR 24- T SPROCKET

USE 51 LINKS 1/2 PITCH ROLLER ...

Not available

Cub Cadet 1301-D

LINK, #40 SINGLE PITCH CONNECTING

Not available
9

Cub Cadet 397031-R1

SPROCKET ASSY., ROTOR

Not available
10

Cub Cadet 271287

FITTING, 1/4-28 PTF STR LUB

Not available
11

Cub Cadet 387835-R91

BEARING, NEEDLE

Not available

Cub Cadet 490087-R1

PACKAGE, PRODUCT GRAPHICS

Not available

4-Cycle Equipment

A basic spring service performed each year should include, at least, the following;
Check the Oil and inspect for contaminants such as water (milky), fuel (too full, thin and smells of gas) or metal particles. Contact a service tech if any are found.
Change your oil now and every 25 hours thereafter.
Sharpen blades now and every 25 hours thereafter.
Inspect air filters for dirt accumulation now, and before each usage and clean or replace. Replace air filters after 25 hours.
Inspect spark plugs every 25 hours and replace if fouled.
Grease all bearings and mechanisms requiring grease.
Inspect entire unit including all wear items such as belts, tires, control cables, bearings and other parts and watch for worn, cracked, pinched or otherwise damaged parts, and replace if found.
Drain fuel from fuel system and replace with fresh fuel if it has been over three months since last usage without fuel stabilizer. If performing and end-of-season service, drain fuel tank or run engine until it runs out of fuel. (alternatively you may dose "fresh" fuel with a fuel stabilizer)