Displaying Steering Column parts for the MTD 13B-325-401 (1999)

Find a full parts listing for all the parts in the Steering Column section of your equipment and add them straight to your cart from here.
Search by part description:
1

MTD 731-1877

Steering Column: Green

Not available
2

MTD 731-1918

Control Knob: Yellow

Your price: $12.32

0 of these in your cart

Qty:
3

MTD 712-0142

Hex Nut 8-32

Your price: $2.35

0 of these in your cart

Qty:
4

MTD 710-3217

Pan Head Machine Screw #8-32

Your price: $3.60

0 of these in your cart

Qty:
5

MTD 710-1017

Torx Head AB Screw 1/4-14 x .625

Your price: $4.21

0 of these in your cart

Qty:

4-Cycle Equipment

A basic spring service performed each year should include, at least, the following;
Check the Oil and inspect for contaminants such as water (milky), fuel (too full, thin and smells of gas) or metal particles. Contact a service tech if any are found.
Change your oil now and every 25 hours thereafter.
Sharpen blades now and every 25 hours thereafter.
Inspect air filters for dirt accumulation now, and before each usage and clean or replace. Replace air filters after 25 hours.
Inspect spark plugs every 25 hours and replace if fouled.
Grease all bearings and mechanisms requiring grease.
Inspect entire unit including all wear items such as belts, tires, control cables, bearings and other parts and watch for worn, cracked, pinched or otherwise damaged parts, and replace if found.
Drain fuel from fuel system and replace with fresh fuel if it has been over three months since last usage without fuel stabilizer. If performing and end-of-season service, drain fuel tank or run engine until it runs out of fuel. (alternatively you may dose "fresh" fuel with a fuel stabilizer)