Displaying Auger Housing parts for the Murray 624504x4C - Dual Stage Snow Thrower (2003)

Find a full parts listing for all the parts in the Auger Housing section of your equipment and add them straight to your cart from here.
Search by part description:
480

Murray 1501211MA

PULLEY, 4L 6.12X .67

Your price: $30.02

0 of these in your cart

Qty:
481

Murray 577400MA

SCREW, 5/16-18 x 0.63

Your price: $2.80

0 of these in your cart

Qty:
482

Murray 2001022MA

KEY, SQUARE 3/16 X 3/4

Your price: $2.85

0 of these in your cart

Qty:
485

Murray 1501158MA

SPACER, FRICTION PULLEY

Your price: $3.35

0 of these in your cart

Qty:
490

Murray 582957 YZ

RETAINER, BALL BRNG

Not available
491

Murray 43846

BEARING, BALL

Not available
493

Murray 001X92MA

BOLT, HEX 5/16-18X .50

Your price: $4.70

0 of these in your cart

Qty:
499

Murray 710026

NUT, 5/16-18 HEXWDFLLK

Not available
500

Murray 1501436E245

HOUSING, ASSY

Not available
510

Murray 760657E701MA

BLADE, SCRAPER

Your price: $21.75

0 of these in your cart

Qty:
511

Murray 340720MA

BOLT, 1/4-20X.75

Your price: $2.80

0 of these in your cart

Qty:
514

Murray 710026

NUT, 1/4-20

Not available
520

Murray 1501441E701

AUGER, ASSY, LH

Not available
521

Murray 1501440E701

AUGER, ASSY, RH

Not available
522

Murray 9524MA

SCREW, 1/4-20X1.75

Your price: $3.63

0 of these in your cart

Qty:
523

Murray 3943MA

SPACER, SLEEVE

Your price: $2.63

0 of these in your cart

Qty:
524

Murray 73826

NUT, 1/4-20

Not available
525

Murray 9517MA

BEARING,FLANGE

Your price: $3.75

0 of these in your cart

Qty:
526

Murray 711862MA

NUT, 5/16-18

Your price: $2.80

0 of these in your cart

Qty:
527

Murray 9357MA

SCREW, 5/16-18 x 0.75

Not available
540

Murray 762377E701

SKID, HEIGHT ADJUST

Not available
541

Murray 340720MA

BOLT, 5/16-18 X .75

Your price: $2.80

0 of these in your cart

Qty:
544

Murray 710026

NUT, 5/16-18

Not available
--

Murray 1501216MA

KIT, SHEAR BOLT

Your price: $4.42

0 of these in your cart

Qty:

4-Cycle Equipment

A basic spring service performed each year should include, at least, the following;
Check the Oil and inspect for contaminants such as water (milky), fuel (too full, thin and smells of gas) or metal particles. Contact a service tech if any are found.
Change your oil now and every 25 hours thereafter.
Sharpen blades now and every 25 hours thereafter.
Inspect air filters for dirt accumulation now, and before each usage and clean or replace. Replace air filters after 25 hours.
Inspect spark plugs every 25 hours and replace if fouled.
Grease all bearings and mechanisms requiring grease.
Inspect entire unit including all wear items such as belts, tires, control cables, bearings and other parts and watch for worn, cracked, pinched or otherwise damaged parts, and replace if found.
Drain fuel from fuel system and replace with fresh fuel if it has been over three months since last usage without fuel stabilizer. If performing and end-of-season service, drain fuel tank or run engine until it runs out of fuel. (alternatively you may dose "fresh" fuel with a fuel stabilizer)