Displaying model categories for Snapper

Browse the categories below for your model or type in your model number in the searchbox to the left to search for your model
Snapper
Snapper traces its roots back to 1894 as Southern Saw Works. Snapper introduced the industry's first self-propelled rotary mower in 1951 and was an innovator of the rear engine riding mower. Today, Snapper manufactures premium lawn care and snow removal equipment for both residential and commercial customers including walk-behind mowers, rear engine riders, tractors, zero turn riders, commercial mowers, snowthrowing equipment, tillers, utility vehicles, generators and pressure washers. Snapper is a division of Simplicity Manufacturing, Inc. Simplicity Manufacturing is a part of the Briggs & Stratton Power Products Group, LLC.

2-Cycle Equipment

A basic spring service performed each year should include, at least, the following;
Sharpen or Replace and Adjust Chain (chainsaw) as needed.
Inspect air filter for dirt accumulation now, and before each usage and clean or replace. Replace air filter after 25 hours.
Inspect spark plug/s every 25 hours and replace if fouled.
Inspect entire unit including all wear items such as control cables, sprockets, handles, tubes and other parts and watch for worn, cracked, pinched or otherwise damaged parts, and replace if found.
Drain fuel-mix from fuel system and replace with fresh fuel-mix if it has been over three months since last usage without fuel stabilizer. If performing and end-of-season service, drain fuel tank or run engine until it runs out of fuel. (alternatively you may dose "fresh" fuel-mix with a fuel stabilizer)