Displaying model categories for Troy-Bilt

Browse the categories below for your model or type in your model number in the searchbox to the left to search for your model
Troy-Bilt
In the 1960's, Lyman Wood changed the future of American gardening by founding the company that later became known as Garden-Way and developed its first product, the Troy-Bilt Rototiller. Garden-Way of Troy, NY, manufactured Troy-Bilt equipment. Garden-Way declared bankruptcy in 2001 and sold the Troy-Bilt and Bolens brands to MTD. Troy-Bilt products manufactured prior to 2001 have limited parts availability. MTD currently offers a full line of equipment marketed under the Troy-Bilt brand.

4-Cycle Equipment

A basic spring service performed each year should include, at least, the following;
Check the Oil and inspect for contaminants such as water (milky), fuel (too full, thin and smells of gas) or metal particles. Contact a service tech if any are found.
Change your oil now and every 25 hours thereafter.
Sharpen blades now and every 25 hours thereafter.
Inspect air filters for dirt accumulation now, and before each usage and clean or replace. Replace air filters after 25 hours.
Inspect spark plugs every 25 hours and replace if fouled.
Grease all bearings and mechanisms requiring grease.
Inspect entire unit including all wear items such as belts, tires, control cables, bearings and other parts and watch for worn, cracked, pinched or otherwise damaged parts, and replace if found.
Drain fuel from fuel system and replace with fresh fuel if it has been over three months since last usage without fuel stabilizer. If performing and end-of-season service, drain fuel tank or run engine until it runs out of fuel. (alternatively you may dose "fresh" fuel with a fuel stabilizer)