Displaying SPRAY GUN, PUMP, HOSE ASSEMBLY parts for the Troy-Bilt 15030 SPRAYER IV (25GAL 3HP) (S/N W002246-W002620)

Find a full parts listing for all the parts in the SPRAY GUN, PUMP, HOSE ASSEMBLY section of your equipment and add them straight to your cart from here.
Search by part description:

Troy-Bilt 1981081

DISCS-SPRAY PKG WSDP1

Not available
1

Troy-Bilt W143BR1/2

GUN-TWIST SPRAY W143BR1/2

Not available
2

Troy-Bilt W43H6BR

GRIP-PISTOL W43H6BR SPRAY GUN

Not available
3

Troy-Bilt W2075660

HOSE-3/8 X 25' W2075660

Not available
4

Troy-Bilt W20983014

TEE-1/2" PIPE W20983014

Not available
5

Troy-Bilt W209810242

PIPE-BUSHING REDUCING

Not available
6

Troy-Bilt WLFS220

GAUGE-GLYCERINE PRESS WLFS220

Not available
7

Troy-Bilt W209810142

NIPPLE-PIPE 50X2 GALVANIZED

Not available
8

Troy-Bilt W20984014

PLUG-PIPE .50" W20984014

Not available
9

Troy-Bilt W20986014

ELBOW-PIPE .50" W20986014

Not available
10

Troy-Bilt W2075662

HOSE-RETURN LINE W2075603

Not available
11

Troy-Bilt W20981014

NIPPLE-1/2" CLOSE W20981014

Not available
12

Troy-Bilt W5330CHKX

PUMP-TWIN PISTON

Not available
13

Troy-Bilt W28200028

ARM-TRQ 25G SPRAY W28200028

Not available
14

Troy-Bilt W14000003

BUMPER-RUBBER TORQUE ARM

Not available
15

Troy-Bilt W33500079

STRAINER W33500079

Not available
16

Troy-Bilt WSE12

ELBOW-1/2" STREET WSE12

Not available
17

Troy-Bilt W2075661

HOSE-17" SUCTION W2075661

Not available
18

Troy-Bilt WTT34

TEE-3/4 PIPE NYL WTT34

Not available
19

Troy-Bilt WF3400

PLUG-3/4" PLASTIC WF3400

Not available
20

Troy-Bilt WM3400

NIPPLE-3/4 CLOSE WM1400

Not available
21

Troy-Bilt W681512300G

VALVE PRESS.

Not available

Off-Season Storage

There are a number of issues that affect storage of power equipment. Gasoline breaks down and leaves a varnish-like coating inside fuel tanks, fuel lines, carburetor circuits and makes rubber and plastic parts brittle. Additionally, tires flatten and dry-rot, and unprotected metal surfaces rust. To avoid damage and expensive repairs you may perform a Spring Service before you store. This may include the following (based on type of equipment):
Change your oil and oil filter (on models with internal oiling and oil filter).
Inspect fuel filter and replace if necessary.
Inspect air filter for dirt accumulation and clean or replace.
Inspect spark plugs and replace if fouled.
Sharpen blades/chains or replace if damaged. (mowers and chainsaws)
Drain fuel from fuel tank and run engine until it runs out of fuel. (alternatively you can dose fuel with a fuel stabilizer)
Grease all bearings and mechanisms requiring grease
Inspect wear items such as belts, starter cords, tires and cables and replace if damaged or badly worn.
Lift equipment and set on blocks to avoid flattening and cracking tires.
Cover equipment to protect from sun and weather
Check these items off your "Honey-Do" list and you should have no frustrations next Season when the equipment is needed again!