Displaying Forward/Neutral/Reverse Lever & Yoke Assembly parts for the Troy-Bilt 2308 Horse III

Find a full parts listing for all the parts in the Forward/Neutral/Reverse Lever & Yoke Assembly section of your equipment and add them straight to your cart from here.
Search by part description:
1

Troy-Bilt 647-04006 (replaces GW-2176)

LEVER - forward/neutral/reverse

Includes plastic knob with pla...

Your price: $74.07

0 of these in your cart

Qty:
2

Troy-Bilt 1908156 (replaces GW-2163)

SPRING - clutch pawl

Your price: $9.93

0 of these in your cart

Qty:
3

Troy-Bilt 710-0805 (replaces GW-9466)

BOLT - hex. hd., 5/16"-18 x 1-1/2"

Your price: $3.75

0 of these in your cart

Qty:
4

Troy-Bilt GW-2447

BUSHING - 3/8" long

Replaces 2160

Your price: $5.16

0 of these in your cart

Qty:
5

Troy-Bilt 736-0607 (replaces GW-9931)

LOCKWASHER - external tooth, 5/16"

Your price: $3.59

0 of these in your cart

Qty:
6

Troy-Bilt 912-0267 (replaces GW-9801)

NUT - hex., 5/16"-18

Your price: $3.77

0 of these in your cart

Qty:
7

Troy-Bilt 686-04006-0638 (replaces GW-2162)

ROLLER ASSEMBLY -forward/neutral/reverse shift lever

Your price: $51.47

0 of these in your cart

Qty:
8

Troy-Bilt 1900468010 (replaces GW-2165-1)

YOKE - left side

Your price: $26.55

0 of these in your cart

Qty:
9

Troy-Bilt 1900469010 (replaces GW-2165-2)

YOKE - right side

Your price: $23.50

0 of these in your cart

Qty:
10

Troy-Bilt 1900860001 (replaces GW-2164)

LINK- yoke pivot, left and right, & 7/8" long

Your price: $10.73

0 of these in your cart

Qty:
11

Troy-Bilt 710-0514 (replaces GW-9710)

BOLT - hex. hd., 3/8"-18 x 1"

Your price: $3.67

0 of these in your cart

Qty:
12

Troy-Bilt 936-0169 (replaces GW-9913)

LOCKWASHER - spring lock, 3/8"

Your price: $3.43

0 of these in your cart

Qty:
13

Troy-Bilt 736-3050 (replaces GW-9904)

WASHER - flat, 3/8", S.A.E

Your price: $3.75

0 of these in your cart

Qty:
14

Troy-Bilt GW-2146

BUSHING - spacer, 21/64"/.325") long, yoke to engine mount

Your price: $4.82

0 of these in your cart

Qty:
15

Troy-Bilt 912-3017 (replaces GW-9802)

NUT - hex., 3/8"-16

Your price: $3.73

0 of these in your cart

Qty:
16

Troy-Bilt GW-1113-1099 (replaces GW-1113-1)

BUSHING - spacer, 19/64" (.300") long, yoke link

Your price: $3.96

0 of these in your cart

Qty:
17

Troy-Bilt 712-3006 (replaces )

KNOB -

plastic knob not available sep...

Your price: $3.86

0 of these in your cart

Qty:

4-Cycle Equipment

A basic spring service performed each year should include, at least, the following;
Check the Oil and inspect for contaminants such as water (milky), fuel (too full, thin and smells of gas) or metal particles. Contact a service tech if any are found.
Change your oil now and every 25 hours thereafter.
Sharpen blades now and every 25 hours thereafter.
Inspect air filters for dirt accumulation now, and before each usage and clean or replace. Replace air filters after 25 hours.
Inspect spark plugs every 25 hours and replace if fouled.
Grease all bearings and mechanisms requiring grease.
Inspect entire unit including all wear items such as belts, tires, control cables, bearings and other parts and watch for worn, cracked, pinched or otherwise damaged parts, and replace if found.
Drain fuel from fuel system and replace with fresh fuel if it has been over three months since last usage without fuel stabilizer. If performing and end-of-season service, drain fuel tank or run engine until it runs out of fuel. (alternatively you may dose "fresh" fuel with a fuel stabilizer)