Husqvarna 578992501 Starter Assembly
0.44 lbs.
Description...
Hide
The purpose of the Recoil Starter or Rewind Starter is to enable the operator to manually pull a cord held under tension by a spring which engages the clutch, turns the crankshaft, and then starts or "cranks" the engine. Over time, the rope, grip, reel or spring that make up the Recoil Starter are all subject to wear out and may eventually fail. Most components of the recoil system can be purchased individually or as a complete assembly. Note the mounting screws are not usually included in the assembly.
Often Bought with this Part
Models that Use this Part
Your part was not found on any models.
- If you feel this is in error or desire further assistance, please call us!
325 HE 3 (966787601) - Husqvarna Hedge Trimmer (SN: 20150100001 & Above)
STARTER
325 HE 4 (966787701) - Husqvarna Hedge Trimmer (SN: 20150100001 & Above)
STARTER
524 L - Husqvarna Brush Cutter
STARTER
525 DEPS - Husqvarna Pole Saw
STARTER
525 L - Husqvarna Brush Cutter (2013-03)
STARTER
525 LS - Husqvarna Brush Cutter (2013-03)
STARTER
525 LS - Husqvarna Brush Cutter (Original)
STARTER
525 LST - Husqvarna Brush Cutter (2013-03)
STARTER
525 P4S - Husqvarna Pole Saw
STARTER
525 P5S - Husqvarna Pole Saw
STARTER
525 PT5S - Husqvarna Pole Saw
STARTER
525 RJD - Husqvarna Brush Cutter (2013-03)
STARTER
525 RS (967622801) - Husqvarna Brush Cutter (2015-09)
STARTER
525 RS - Husqvarna Brush Cutter (2013-03)
STARTER
