Husqvarna 577 81 28-01  CENTRIFUGAL CLUTCH100-120V, 60Hz, US/CAN/JP

Husqvarna Construction 577 81 28-01 CENTRIFUGAL CLUTCH100-120V, 60Hz, US/CAN/JP

Husqvarna Construction 577 81 28-01

CENTRIFUGAL CLUTCH100-120V, 60Hz, US/CAN/JP
(Superseded to )

0.22 lbs.

Description... Hide
The purpose of the Clutch is to connect the crankshaft to the driveshaft to provide output power for work. When engaged, the clutch ensures two shafts are locked together and spinning at the same speed. Over time, the rotor and brake can wear down as they are engaged and disengaged, and springs can crack, which usually require a replacement of the whole clutch. When installing, ensure that the drive pulley is smooth, the clutch is properly torqued with enough clamp, and any wires are properly fastened.

$50.17

$

Usually ships in 3-10 days

0

Models that Use this Part

Your part was not found on any models.

  • If you feel this is in error or desire further assistance, please call us!

PG 280 - Husqvarna Planetary Floor Grinder (SN: 20100200001 - 20141399999) (2011-07)

GRINDING HEAD AND MOTOR