MTD 746-0635 Throttle Cable, 35"
10.20 in.
9.55 in.
1.95 in.
0.11 lbs.
Description...
Hide
The purpose of the Cable is most often to control the operation of the equipment itself, as with the throttle cable or brake cable, or to control a major component like the snow blower auger cable or discharge chute cable. Over time the cable can fray, wear and eventually break. Home users often clean and lube the cables during their annual tune-up. Cleaning rust, dirt, moisture, and grit off your cables and then well lubricating them with WD-40 or SeaForm DC14 can help extend their life expectancy.
$10.99
$
In Stock, Qty 11
Often Bought with this Part
Models that Use this Part
Your part was not found on any models.
- If you feel this is in error or desire further assistance, please call us!
06-010706 (240-596-372) - Hechinger Edger (1990)
Parts
06-348080 (251-586-372) - MasterCut by MTD Walk-Behind Edger (1991)
Parts01
06-348080 (252-586-372) - Hechinger Edger (1992)
General Assembly
132-446 (251-586-129) - MasterCut by MTD Walk-Behind Edger (1991) (Home Depot)
Parts01
188-942 (252-586-129) - MTD Edger (1992) (Home Depot)
General Assembly
223-8953-00 (249-604-034) - MTD Edger (1989) (Goodyear)
Parts
223-9014-00 (250-586-034) - MTD Edger (1990) (Goodyear)
Parts
223-9113-00 (251-586-034) - MTD Edger (1991) (Goodyear)
Parts
223-921-700 (252-586-034) - Sentar Edger (1992) (Goodyear)
General Assembly
240-586-000 - MTD Edger (1990)
Parts
24604-8 - MTD Edger (1988)
Edger
24604-9 - MTD Edger (1989)
Edger
248-604-000 - MTD Edger (1988)
Parts
248-604-009 - MTD Edger (1988) (Hardware Wholesalers)
Parts
248-604-013 - MTD Edger (1988) (Costco)
Parts
248-604-027 - MTD Edger (1988) (United Hardware)
Parts
248-604-032 - MTD Edger (1988) (Pro Hardware)
Parts
248-604-045 - MTD Edger (1988) (Pay-N-Pack)
Parts
248-604-046 - MTD Edger (1988) (Central Hardware)
Parts
248-604-059 - MTD Edger (1988) (Gibson Products)
Parts
248-604-087 - MTD Edger (1988) (Payless Cashway)
Parts
248-604-102 - MTD Edger (1988) (Pace Membership Wholesale)
Parts
248-604-118 - MTD Edger (1988) (Sam's Club)
Parts
248-604-141 - MTD Edger (1988) (W.S. Badcock Corporation)
Parts
