Snapper 7028223 Auger Cable
0.13 lbs.
Description...
Hide
The purpose of the Cable is most often to control the operation of the equipment itself, as with the throttle cable or brake cable, or to control a major component like the snowblower auger cable or discharge chute cable. Over time the cable can fray, wear and eventually break. Home users often clean and lube the cables during their annual tune-up. Cleaning rust, dirt, moisture, and grit off your cables and then well lubricating them with WD-40 or SeaForm DC14 can help extend their life expectancy.
$21.99
$
In Stock, only 2 left!
Often Bought with this Part
Models that Use this Part
Your part was not found on any models.
- If you feel this is in error or desire further assistance, please call us!
10305 (84372) - Snapper 30" Snow Thrower, 10hp
Hardware Bag Kit #61365
10305E (80590) - Snapper 30" Snow Thrower, 10hp
Hardware Bag Kit #61365
11305 (84568) - Snapper 30" Snow Thrower, 11hp
Hardware Bag Kit #61365
8245 (84369) - Snapper 24" Snow Thrower, 8hp
Handles, Controls
8246 (84924) - Snapper 24" Snow Thrower, 8hp
Handles, Controls (Part 1)
9265 (84370) - Snapper 26" Snow Thrower, 9hp
Hardware Bag Kit #61365
9266 - Snapper 26" Snow Thrower, 9hp
Handles, Controls (Part 1)
E 10305 (84373) - Snapper 30" Snow Thrower, 10hp
Hardware Bag Kit #61365
E 10305E (80866) - Snapper 30" Snow Thrower, 10hp
Hardware Bag Kit #61365
E 11305 (84572) - Snapper 30" Snow Thrower, 11hp
Hardware Bag Kit #61365
E 8265 (80868) - Snapper 26" Snow Thrower, 8hp
Hardware Bag Kit #61365
E 9265 (82499) - Snapper 26" Snow Thrower, 9hp
Hardware Bag Kit #61365
EI 55223 (82497) - Snapper 22" Snow Thrower, 5.5hp
Handles, Controls (Conventional Type)
EI 55224 (84678) - Snapper 22" Snow Thrower, 5.5hp
Handles, Controls (Conventional Type)
I 4223 (80588) - Snapper 22" Snow Thrower, 4hp
Handles, Controls (Conventional Type)
I 5223 (80844) - Snapper 22" Snow Thrower, 5hp
Handles, Controls (Conventional Type)
I 55223 (82496) - Snapper 22" Snow Thrower, 5.5hp
Handles, Controls (Conventional Type)
I 55224 (84712) - Snapper 22" Snow Thrower, 5.5hp
Handles, Controls (Conventional Type)
