Toro Commercial 103-3132  Clutch Kit, 1.12 Spacer

Toro 103-3132

Clutch Kit, 1.12 Spacer
(Superseded to 116-1611)

13.67 lbs.

Description... Hide
The purpose of the Clutch is to connect the crankshaft to the driveshaft to provide output power for work. When engaged, the clutch ensures two shafts are locked together and spinning at the same speed. Over time, the rotor and brake can wear down as they are engaged and disengaged, and springs can crack, which usually require a replacement of the whole clutch. When installing, ensure that the drive pulley is smooth, the clutch is properly torqued with enough clamp, and any wires are properly fastened.

$512.99

$

In Stock, only 1 left!

0

Models that Use this Part

Your part was not found on any models.

  • If you feel this is in error or desire further assistance, please call us!

74243 (Z 557) - Toro 52" Z Master Zero-Turn Mower, Side-Discharge Deck (SN: 240000001 - 240999999) (2004)

ENGINE AND CLUTCH ASSEMBLY

74246 TE (Z 557) - Toro 152cm Z Master Zero-Turn Mower, Side-Discharge Deck (SN: 240000001 - 240999999) (2004)

ENGINE AND CLUTCH ASSEMBLY

74246 (Z 557) - Toro 60" Z Master Zero-Turn Mower, Side-Discharge Deck (SN: 240000001 - 240999999) (2004)

ENGINE AND CLUTCH ASSEMBLY

74247 (Z 557) - Toro 72" Z Master Zero-Turn Mower, Side-Discharge Deck (SN: 240000001 - 240999999) (2004)

ENGINE AND CLUTCH ASSEMBLY

74255 (Z 588 E) - Toro 60" Z Master Zero-Turn Mower, Side-Discharge Deck (SN: 240000001 - 240999999) (2004)

ENGINE AND CLUTCH ASSEMBLY

74256 (Z 588 E) - Toro 72" Z Master Zero-Turn Mower, Side-Discharge Deck (SN: 240000001 - 240999999) (2004)

ENGINE AND CLUTCH ASSEMBLY