MTD 746-1103A  Lift Cable with Trigger

MTD 746-1103A

Lift Cable with Trigger
(Superseded to 946-1103A)

12.10 in.

9.70 in.

1.30 in.

0.44 lbs.

Description... Hide
The purpose of the Cable is most often to control the operation of the equipment itself, as with the throttle cable or brake cable, or to control a major component like the snow blower auger cable or discharge chute cable. Over time the cable can fray, wear and eventually break. Home users often clean and lube the cables during their annual tune-up. Cleaning rust, dirt, moisture, and grit off your cables and then well lubricating them with WD-40 or SeaForm DC14 can help extend their life expectancy.

$68.99

$

In Stock, Qty 5

0

Models that Use this Part

Your part was not found on any models.

  • If you feel this is in error or desire further assistance, please call us!

032 (OEM-190-032) - Cub Cadet 42" Snow Thrower Attachment att

Drive & Handle Assembly 2009 & After

190-032-101 (OEM-190-032) - MTD 42" 2-Stage Snow Thrower Attachment

Drive & Handle Assembly 2009 & After

190-032-101 (OEM-190-032) - MTD 42" 2-Stage Snow Thrower Attachment (2005)

General Assembly

190-032-101 (OEM-190-032) - MTD 42" 2-Stage Snow Thrower Attachment (2006)

General Assembly

190-032-101 (OEM-190-032) - MTD 42" 2-Stage Snow Thrower Attachment (2007)

Drive & Handle Assembly

190-032-101 (OEM-190-032) - MTD 42" 2-Stage Snow Thrower Attachment (2008)

Drive & Handle Assembly

190-032-101 (OEM-190-032) - MTD 42" 2-Stage Snow Thrower Attachment (2009)

Drive & Handle Assembly

190-032-101 (OEM-190-032) - MTD 42" 2-Stage Snow Thrower Attachment (2010)

Drive & Handle Assembly

190-032-101 (OEM-190-032) - MTD 42" 2-Stage Snow Thrower Attachment (2011)

Drive & Handle Assembly

190-032-101 (OEM-190-032) - MTD 42" 2-Stage Snow Thrower Attachment (2012)

Drive & Handle Assembly

190-032-101 (OEM-190-032) - MTD 42" 2-Stage Snow Thrower Attachment (2013)

Drive & Handle Assembly

190-032-101 (OEM-190-032) - MTD 42" 2-Stage Snow Thrower Attachment (2014)

Drive & Handle Assembly

190-032-101 (OEM-190-032) - MTD 42" 2-Stage Snow Thrower Attachment (2015)

Drive & Handle Assembly 2009 & After

19A70009OEM - MTD Two-Stage Snow Thrower Assembly (2009)

Linkage & Controls