MTD 946-0910A Clutch Cable
10.30 in.
8.20 in.
3.05 in.
0.12 lbs.
Description...
Hide
The purpose of the Cable is most often to control the operation of the equipment itself, as with the throttle cable or brake cable, or to control a major component like the snow blower auger cable or discharge chute cable. Over time the cable can fray, wear and eventually break. Home users often clean and lube the cables during their annual tune-up. Cleaning rust, dirt, moisture, and grit off your cables and then well lubricating them with WD-40 or SeaForm DC14 can help extend their life expectancy.
$27.99
$
In Stock, Qty 16
Often Bought with this Part
Models that Use this Part
Your part was not found on any models.
- If you feel this is in error or desire further assistance, please call us!
140 (31B-140-000) - White Outdoor Snow Thrower (2002)
Handle Assembly (Part 2)
SB-30 (315-142-190) - White Outdoor Snow Boss Snow Thrower (1995)
Chutes
SB-30 (316-142-190) - White Outdoor Snow Boss Snow Thrower (1996)
Chassis
SB-30 (31A-142-190) - White Outdoor Snow Boss Snow Thrower (1998)
Blower Housing And Auger
SB-30 (31A-142-190) - White Outdoor Snow Boss Snow Thrower (1999)
Blower Housing And Auger
SB-35 (315E142-190) - White Outdoor Snow Boss Snow Thrower (1995)
Chutes
SB-35 (316E142-190) - White Outdoor Snow Boss Snow Thrower (1996)
Chassis
SB-40 (315-152-190) - White Outdoor Snow Boss Snow Thrower (1995)
Chutes
SB-40 (316-152-190) - White Outdoor Snow Boss Snow Thrower (1996)
Chassis
SB-45 (31A-152-190) - White Outdoor Snow Boss Snow Thrower (2000)
General Assembly
SB-45 (31A-152-190) - White Outdoor Snow Boss Snow Thrower (2001)
General Assembly
SB-45 (31A-152-190) - White Outdoor Snow Boss Snow Thrower (2002)
General Assembly
