Honda 28400-ZE7-003ZA  Starter Assembly, R280

Honda 28400-ZE7-003ZA Starter Assembly, R280

Honda 28400-ZE7-003ZA

Starter Assembly, R280
(Superseded to )

1.72 lbs.

Description... Hide
The purpose of the Recoil Starter or Rewind Starter is to enable the operator to manually pull a cord held under tension by a spring which engages the clutch, turns the crankshaft, and then starts or "cranks" the engine. Over time, the rope, grip, reel or spring that make up the Recoil Starter are all subject to wear out and may eventually fail. Most components of the recoil system can be purchased individually or as a complete assembly. Note the mounting screws are not usually included in the assembly.

$

$

Not available

Models that Use this Part

Your part was not found on any models.

  • If you feel this is in error or desire further assistance, please call us!

GXV160 A12 (GJ03) - Honda Engine, Made in Japan (SN: GJ03-1000001 - GJ03-1366578)

RECOIL STARTER

GXV160 N12 (GJ03) - Honda Engine, Made in Japan (SN: GJ03-1000001 - GJ03-1366578)

RECOIL STARTER

GXV160 N1E2 (GJ03) - Honda Engine, Made in Japan (SN: GJ03-1000001 - GJ03-1366578)

RECOIL STARTER

GXV160 N42 (GJ03) - Honda Engine, Made in Japan (SN: GJ03-1000001 - GJ03-1366578)

RECOIL STARTER

GXV160 N62 (GJ03) - Honda Engine, Made in Japan (SN: GJ03-1000001 - GJ03-1366578)

RECOIL STARTER

HRA216 SXA (MACR) - Honda 21" Walk-Behind Mower, Made in Japan (SN: MACR-3000001 - MACR-5000000)

RECOIL STARTER