RedMax 505175301 Blade
0.20 lbs.
Description...
Hide
When installing a new Blade, or Cutter, you may notice that the cutting edge has been pre-sharpened but then painted over. This paint is a safety measure to protect the installer from injury during installation. This paint will come off quickly during initial operation and should not be otherwise removed. For added safety, when installing a blade on a walk-behind mower, you might consider disconnecting the Spark Plug wire to prevent accidental engine ignition. Please handle all blades with extra caution.
$14.99
$
In Stock, Qty 20+
Often Bought with this Part
Models that Use this Part
Your part was not found on any models.
- If you feel this is in error or desire further assistance, please call us!
HE 225 F - RedMax Edger (SN: 50100000 & Above)
DRIVE
HEZ 230 F (967600801) - RedMax Edger (2014-08)
DRIVE
HEZ 230 S (967600701) - RedMax Edger (2014-08)
DRIVE
HEZ 2401 S - RedMax Edger (SN: 70200101 & Above)
DRIVE
HEZ 2450 S - RedMax Edger (SN: 90900101 & Above)
DRIVE
HEZ 2500 F - RedMax Edger (SN: 50100000 & Above)
DRIVE
HEZ 260 F (967600901) - RedMax Edger (2014-08)
DRIVE
HEZ 2601 F - RedMax Edger (SN: 60100101 & Above)
DRIVE
HEZ 2601 S - RedMax Edger (SN: 60100101 & Above)
PRODUCT COMPLETE
HEZ 2602 S - RedMax Edger (SN: 60800001 - 70200100)
CUTTING EQUIPMENT
HEZ 2650 F - RedMax Edger (SN: 90800101 & Above)
DRIVE
HEZ 3001 S - RedMax Edger (SN: 70200101 & Above)
CUTTING EQUIPMENT
